一种基于虚拟页地址映射的NAND Flash管理算法

本文提出了一种基于虚拟页地址映射的NAND Flash管理算法.该算法通过定义坏块表、对应表等结构，以及设计的坏块替换策略和虚拟页地址到实际物理页地址的转换算法，实现上层软件采用虚拟地址对NAND Flash的无坏块连续页地址访问.该算法是一种高效的地址映射算法，能高效地对数据进行索引，占用SRAM空间较少，使系统达到高性能，并使得闪存使用的更加稳定持久.     

Real-time clock comparison and monitoring with multi-GNSS precise point positioning: GPS,GLONASS and Galileo

The precise point positioning (PPP) technique is widely used in time and frequency applications. Because of the real-time service (RTS) project of the International GNSS Service, we can use the PPP technique for real-time clock comparison and monitoring. As a participant in the RTS, the Centre National d’Etudes Spatiales (CNES) implements the PPPWIZARD (Precise Point Positioning with Integer and Zero-difference Ambiguity Resolution Demonstrator) project to validate carrier phase ambiguity resolution. Unlike the Integer-PPP (IPPP) of the CNES, fixing ambiguities in the post-processing mode, the PPPWIZARD operates in the real-time mode, which is also called real-time IPPP (RT-IPPP). This paper focuses on applying the RT-IPPP for real-time clock comparison and monitoring. We review the principle of real-time clock comparison and monitoring, and introduce the methodology of the RT-IPPP technique. The observations of GPS, GLONASS and Galileo were processed for the experiments. Five processing modes were provided in the experiment to analyze the benefits of ambiguity resolution and multi-GNSS. In the clock comparison experiment, the average reduction ratios of standard deviations with respect to the G PPP mode range from 9.7% to 35.0%. In the clock monitoring experiment, G PPP mode can detect clock jumps whose magnitudes are larger than 0.9 ns. The RT-IPPP technique with GRE PPP AR (G) mode allows for the detection of any clock jumps larger than 0.6 ns. For frequency monitoring, G PPP mode allows detection of frequency changes larger than 1.1 × 10⁻¹⁴. When the RT-IPPP technique is applied, monitoring with GRE PPP AR (G) mode can detect frequency changes larger than 6.1 × 10⁻¹⁵.     

基于位移和力值组合的静重式力标准机砝码加卸载控制方法研究

介绍了一种基于位移和力值组合的静重式力标准机砝码加卸载的控制方法，通过监测砝码的移动量和参考力传感器叠加系统的力值量，实时调整加卸载机构的加卸载速度，以实现对被检力传感器的平滑加卸载的目的。该方法有效解决了吊挂在加载过程中产生较大摆动，影响力标准机复现力值准确度的问题，同时也消除了力值过冲现象，避免了因逆程效应而导致的力传感器输出偏差。     

基于类脑模型与深度神经网络的目标检测与跟踪技术研究

目标检测与跟踪技术广泛应用于交通、医疗、安保和航天等领域.目前，目标检测与跟踪技术面临目标微弱、背景复杂、目标被遮挡等挑战.同时，随着脑科学研究的不断深入，人们对人脑视觉系统的理解逐渐透彻，利用类脑计算解决复杂背景下高精度目标检测与跟踪问题成为相关领域的重要研究方向.本文结合神经工程导向的类脑模型和计算机工程导向的深度神经网络(Deep Neural Networks, DNNs)，提出多种基于类脑模型与深度神经网络的目标检测与跟踪算法，包括：基于演算侧抑制的目标检测算法，基于结构 对比度(Structure Contrast, SC)视觉注意模型的弱小目标检测算法和基于记忆机制与分层卷积特征的目标跟踪算法.实验结果表明，将类脑模型和深度神经网络应用于目标检测和跟踪领域，有利于实现复杂条件下的高精度目标检测和鲁棒性目标跟踪.     

Statistical study of the time delay of ionospheric TEC storms to geomagnetic storms in Taoyuan,Taiwan

We have studied the time delay of ionospheric storms to geomagnetic storms at a low latitude station Taoyuan (25.02°N, 121.21°E), Taiwan using the Dst and TEC data during 126 geomagnetic storms from the year 2002 to 2014. In addition to the known local time dependence of the time delay, the statistics show that the time delay has significant seasonal characteristics, which can be explained within the framework of the seasonal characteristics of the ionospheric TEC. The data also show that there is no correlation between the time delay and the intensity of magnetic storms. As for the solar activity dependence of the time delay, the results show that there is no relationship between the time delay of positive storms and the solar activity, whereas the time delay of negative storms has weakly negative dependence on the solar activity, with correlation coefficient −0.41. Especially, there are two kinds of extreme events: pre-storm response events and long-time delay events. All of the pre-storm response events occurred during 15–20 LT, manifesting the Equator Ionospheric Anomaly (EIA) feature at Taoyuan. Moreover, the common features of the pre-storm response events suggest the storm sudden commencement (SSC) and weak geomagnetic disturbance before the main phase onset (MPO) of magnetic storms are two main possible causes of the pre-storm response events. By analyzing the geomagnetic indices during the events with long-time delay, we infer that this kind of events may not be caused by magnetic storms, and they might belong to ionospheric Q-disturbances.     

大跨时空任务背景下的太阳能无人机任务规划技术研究进展

通过任务规划技术合理的优化太阳能无人机的飞行轨迹和动力学参数，能够有效提高太阳能无人机的能量利用率，使其胜任许多大范围跨时间跨空间飞行任务。从能量建模、续航评估和能量管理策略3个方面对大跨时空任务背景下太阳能无人机任务规划技术的研究进展进行了综述。在能量建模方面，介绍了当前主流的太阳辐射模型和能量生产基本框架；在续航评估方面，分析了目前的指标设计和应用方法；在能量管理策略方面，从能量综合应用、风力滑翔机制、轨迹优化方法和面向特定任务的应用4个角度，梳理了当前的研究现状。最后，对该领域未来可能的研究方向进行了展望。     

Effect of curing condition on bonding quality of scarf-repaired composite laminates

Both single-face vacuum bag curing (SVC) and double-face vacuum bag curing (DVC) can be used in scarf repair of composite structures. But different curing conditions caused by the sealing state may affect the bonding quality of scarf-repaired structures. In this paper, the effect of curing condition on bonding quality of scarf-repaired laminates was experimentally investigated in terms of surface profiles, moisture absorption curves and section profiles. In order to further explore the moisture absorption mechanism, finite element model of the repaired laminates using DVC was established with moisture diffusion of both the adhesive and composite laminates considered. This model was verified by experimental results. Based on the model of DVC case, the model of SVC case was built by changing moisture absorption parameters of the adhesive. Results show that SVC reduces the bonding quality, mainly reflecting in more adhesive inner voids and patch-to-parent dislocation. And SVC increases moisture absorption rate and moisture equilibrium content of the adhesive, and its effect on the former is far greater than that on the latter.     

低温磨料气射流加工PDMS实验研究

通过自研的低温磨料气射流加工装置进行低温磨料气射流加工聚二甲基硅氧烷(polydimethylsiloxane,PDMS)实验研究,分析了加工时间、加工距离、冲蚀角度和磨料粒径对冲蚀率、孔深和孔横截面形貌的影响。结果表明:随着加工时间的增加,冲蚀率先增大后减小,在第1阶段加工过程中,孔深与加工时间大致呈线性关系,增加加工时间还可使孔底部变平整;存在一个最佳加工距离使孔深最大,当加工距离大于最大加工距离时,孔深将随着加工距离的增加而急剧下降,孔的锥度随着加工距离的增大而增大;当冲蚀角度处于30°～60°之间时,冲蚀率最大,随着冲蚀角度的增加,孔的形状逐步由椭圆形变成圆形;存在一个最佳磨料粒径,使冲蚀率和孔深达到最大;当冲蚀角度小于90°时,低温磨料气射流加工PDMS材料去除机理为塑性去除和脆性去除的结合。     

热塑性定型剂对干铺丝-RTM工艺及力学性能影响

为了研究热塑性定型剂的添加对干铺丝-树脂传递模塑（RTM）工艺的影响，采用PA-6作为热塑性定型剂，通过T-剥离确定定型剂的质量分数，结合试验和工艺仿真，研究了定型剂对预制体面内渗透率的影响，并对其充模过程进行工艺仿真和分析，在此基础上研究了定型剂对环氧复合材料制品层间性能及韧性的影响。渗透率试验和仿真结果表明:加入定型剂后，纤维预制体的沿纤维和垂直纤维的面内渗透率分别降低了55.5%和52.0%；工艺仿真结果与试验结果一致，不同渗透长度下的注胶时间偏差均小于10%。力学性能试验结果表明:加入热塑性定型剂可显著提升环氧树脂复合材料的韧性，Ⅰ型和Ⅱ型层间断裂韧性分别提高了89.3%和54.1%，冲击韧性提高了18.7%，复合材料的层间剪切强度降低了23.6%。